Mira Jump MK2 Multi-Fit Electric Shower 9.5kW - White/Chrome (1.1788.011) Shower Spares
- Mira 1.1788.011
- 18 spares listed
All available shower spares/replacement parts to fit the Mira Jump MK2 Multi-Fit Electric Shower 9.5kW - White/Chrome (1.1788.011).
Use the main diagram to identify the shower spare(s) you need to replace. Then use the table below to locate your relevant part(s).
Not what you're looking for? Try our unique Shower Spares Finder.
Need any help identifying the fault with your shower? Take a look at our handy Fault Finder page.
Otherwise please feel free to contact us.
There are 11 currently available spares for the Mira Jump MK2 Multi-Fit Electric Shower 9.5kW - White/Chrome (1.1788.011).
These are sorted by diagram reference first (if available) and then by product code in numerical / alphabetical order:1.1788.011 £158.45£158.45 Add to Basket
Do you have a question about the Mira Jump MK2 Multi-Fit Electric Shower 9.5kW - White/Chrome (1.1788.011)?
Click the button below to send a question to one of our expert members of staff and we will email you back a direct response. If we feel the information might be useful to other customers, we will also show your question below for others to see.
Dear Sir / Madam,
I have a mark 2 Mira Jump shower, the switch does not switch on / Off by the button on the cover,
There is a small plastic strip ( Approx 50mm by 5mm ) that appears to fit behind the switch on the cover, this as broken off, thus the actual switch mechanism fitted to The shower does not get pushed in to turn on/ off
Do I need a complete front cover or just the plastic strip ?
Many thanks and kind regards
The replacement part you require is only supplied with the replacement cover. Part number 1788.424
Hi I am an electrician and have fitted the above shower for grandparents. This is now out of warranty and playing up. The unit has power and isolator is fine. It will switch on and after a few seconds switches itself off. The led is still on when it goes off and I have tested the micro switch and this is working correctly. Would this be a coil or pump issue. Is this a common fault? I know it's a long shot but would you have any idea as to the part I need and if so is it in stock? Thank you.
You will require the flow valve assembly part number 1788.429