Triton Aquatronic 4 (Aquatronic 4) Shower Spares
- Triton Aquatronic 4
- 18 spares listed
All available shower spares/replacement parts to fit the Triton Aquatronic 4 (Aquatronic 4).
Use the main diagram to identify the shower spare(s) you need to replace. Then use the table below to locate your relevant part(s).
There are 12 currently available spares for the Triton Aquatronic 4 (Aquatronic 4).
These are sorted by diagram reference first (if available) and then by product code in numerical / alphabetical order:Ref. 8/9 82600810 £38.90£38.90 Add to BasketDiscontinued£16.65 Contact For Availability
Do you have a question about the Triton Aquatronic 4 (Aquatronic 4)?
Click the button below to send a question to one of our expert members of staff and we will email you back a direct response. If we feel the information might be useful to other customers, we will also show your question below for others to see.
I have an existing Aquatronic 4. It's aprox 15yrs old. There is no power rating on shower. Can you please advise. Thanks
Hello, there is usually a sticky label next to the terminal block inside the shower, the only other place is the top plate of the heater tank, it is stamped in the copper top plate, very small print/stamp
The water does not stop flowing when I press the 'off' button. I have to turn off the water supply using the stop valve under the bath. All other functions are normal.
Hello, it would appear that the solenoid valve is jammed open, you to replace the solenoid, part number 83304130
have a triton aquatronic 4 when l put it on water comes from the shower head and a little pipe at the back of it
It would appear the pressure relief device has blown. The part is located at the bottom of the heater can assembly with the code 83301330
I have a Aqua Tronic 4 electric shower. It has a cold water feed direct from the mains water supply which gives a high pressure, However when I turn the shower on the low pressure light keeps coming on and the water does not get hot.
Hello, you may have a faulty pressure switch, it is part of the stabilising valve